- Process Plants
- Air Separation Plants
- Wet Air Oxidation
- LNG and Natural Gas Processing Plants
- Hydrogen and synthesis gas
- Chemical and Petrochemical Plants
- Adsorption and membrane plants
- Cryogenic Plants
- CCS and CO2 Plants
Furnaces, fired heaters, incinerators
- Steam reformer furnaces
- Cracking Furnaces for Ethylene Production
- Cryogenic vaporiser
- Fired heaters and waste heat recovery units
- DRI heaters & special crackers
- Incinerators and thermal oxidisers
Incinerating waste streams comprising salt brines, aqueous liquids with organic contaminates, inorganic salts or metals pose many challenges. The most important consideration is that organic components have to be completely destroyed.
If inorganic metals (mainly alkalis) are present, designers must factor in the reactions in the gas phase as well as the reactions between the salts that have formed and the refractory linings.
Typical applications include:
Spent caustic from ethylene plants
Pharmaceutical plant waste
Agricultural chemical plant waste
Bio-diesel plant waste
During the incineration process, most of the alkaline metals form salts with melting points lower than those required for the complete combustion of organics. These molten salts are corrosive to and reactive with common refractory materials. Selecting the correct operating temperature and lining material is crucial to ensuring that a plant maintains high availability.
Linde Engineering meets the application challenges of these complex wastes by down firing the incinerator into our proprietary Sub-X® vertical quench design to continuously remove salts from the incinerator walls. Our design is particularly efficient for this process as it rapidly cools the gases. The high level of agitation dissolves most of the salt into the quench liquor, thus ensuring that the gases undergo initial cleaning. Residual salts suspended within the gas stream at the quench outlet are scrubbed, meeting the most stringent air quality standards.